PVC Pipe Birds & Animals - Beginner-Friendly Tutorial
PVC pipe birds are adorable posed in little spots in your yard, make great gifts, and are a completely unique craft to make and sell. This tutorial shows you the exact method: print a pattern, trace it, cut it, heat-shape it, clean it, paint it, and display it.
What You Need
- Printable PVC bird pattern
- Jig saw / jigsaw
- 4" PVC pipe OR 4' x 8' PVC sheet - Schedule 40 recommended
- File
- Drill + drill bit
- Heat gun + heat-proof gloves
- Screws
- Acetone + old washcloth
- Spray paints made for plastic + clear acrylic sealer
- Optional: rhinestones or plastic eyes + E6000 glue
Which PVC? You can use thinner-walled PVC pipe (sewer drain pipe), but Schedule 40 is recommended if you plan to sell them, gift them, or keep them outside most of the year. Thinner pipe will not hold up as well to hot sun or heavy snow.
Safety First
- Always follow the manufacturer instructions for your tools and products
- Always wear safety glasses / protection when working with tools and chemicals
- Always work in a well-ventilated area when using chemicals
- Always keep a clean and safe work area when working with multiple tools
- Heat guns get extremely hot - watch where you point it and where you set it down
Step 1: Print, Cut Out & Tape Your Pattern
Print your pattern, cut it out, tape the pieces together, then tape it in place on your 4" Schedule 40 PVC pipe or PVC sheet. Trace around it with a pencil.
Tip: Getting one well-proportioned pattern is the hard part - that is why printable patterns save hours of trial, wasted PVC, and wasted money.
Step 2: Cut It Out With a Jig Saw
Cut along your traced lines with your jig saw. Cutting PVC with a jig saw has a little learning curve at first - keep at it. Once you get the hang of it, it gets super easy.
Step 3: File the Edges Smooth
Use your file to smooth along all edges. Jig saws can leave sharp spots, especially where corners meet. Filing makes them nice and smooth.
Step 4: Heat-Shape With a Heat Gun - One Section at a Time
Aim your heat gun at the area you are working on until it begins to heat up and become pliable, then reshape that area how you want it to look. Work your way along the piece, reshaping one section at a time. Wear heat-proof gloves.
When you get to the legs, bend some of the pipe forward so you can drill a hole in the feet - that is how you will anchor him down later.
Step 5: Clean It With Acetone
Use acetone and an old washcloth to remove all the printed ink on the pipe and any ugly marks. You can also use a little sander if the ink is hard to remove. This leaves him nice and white and ready for paint.
Step 6: Paint + Seal
Paint depends on which bird or animal you make. Use spray paints made for plastic. Finish with a clear acrylic sealer to help protect the paint.
Step 7: Display your pieces
Attach him with screws to something sturdy - a concrete patio block, a piece of heavy wood, or a deck / pier step. Or use metal tent stakes: drill a hole through his feet large enough to fit the stake, stick the stake through the hole, and secure him into the ground.
Note: Stakes do not work as well for taller, larger, or heavy animals, or on uneven ground.
Can You Sell Them?
Yes - these are so fun and unique, they make an awesome craft to make and sell. You can use the patterns to sell your own finished animals. You can not resell, distribute, or give away the patterns themselves.
Want All 100+ Patterns?
Skip the weeks of designing and testing. Get printable PDFs you can download, print, and start making today.
Shop All Patterns → Buy on Etsy →
FAQ
Do I need Schedule 40 PVC? Recommended for selling, gifting, or year-round outdoor use. Thinner pipe is okay for indoor / short-term pieces.
What birds are in the tutorial? Flamingo, heron, egret and more - 11 bird patterns in the PVC Birds set, inside the 75+ Yard Art bundle.
Can I paint PVC? Yes - use spray paint made for plastic, then seal with clear acrylic.
Is this a physical product? No. Patterns are a digital download only. You will not receive anything in the mail.